The New PIR Option For Cygnus Wireless Alarm System

The PIR functionality works best with the Cygnus GSM control panel which sends users an SMS text alert notification should an intrusion occur.  The PIR sensors on the individual units are activated by using the menu settings on the control panel, and if an intruder is to pass the sensor in its activated mode, this will cause the local alarm to sound.

The CE marked Cygnus wireless alarm system has raised the bar in the industry for performance and reliability and has impressive capability linking together 480 units in 15 zones around construction sites, each zone having a capacity of 32 units.

When any fire alarm call point or detector raises an alarm, it activates all other devices around the entire construction site, these devices normally situated in prominent places such as main escape routes and fire exits.  In a similar way, when a first aid alert is raised, each first aid device will beep intermittently every 8 seconds, and a message is sent to the control panel to alert the first aider and can also trigger a paging system or can send a text if required. 

The Cygnus system is designed for use in dense concrete and steel structured buildings and in areas where there are many other radio frequencies in operation, and so particular attention has been given to achieving an impressive connection range.  It operates on a Category 1 radio frequency and open air tests prove the Cygnus system range can exceed 1.5km.

The control panel for the Cygnus system provides very sophisticated capability with an event log function which records any events such as an alarm activation, low battery warning, and signal faults all of which can be viewed if necessary in the history folder held on the panel.  The system also has the ability to test all units and has an evacuate function which will act as a call point to the rest of the alarm units. 

All call points in the Cygnus system are IP rated for water protection and all detector units have internal sounders for alerting.  There is also an option of a GSM datalink for remote access and text notifications of alarms to users.

Bull Products offers a full one year guarantee on all Cygnus devices and provides high levels of technical, on-site and after-sales service support in addition to its standard maintenance contract.

For further information on the Cygnus Wireless Alarm System please contact our sales team on 0844 669 1111, or email info@bullproducts.co.uk


Don’t get left in the dark this winter

Bull Products has extended its range of construction site safety equipment, with the addition of new temporary lighting and cabling products. The equipment has been designed specifically for building sites, is easily transported and energy efficient. It is also robust enough for both internal and external use, and is suitable for the extreme, harsh conditions […]

08.09.2020

Bull Products wins contract to protect world’s largest superyacht

Bull Products has strengthened its presence in the shipbuilding industry, after securing a contract to protect m/v REV Ocean, the world’s largest superyacht. Bull is working with Vestcom, a major wireless communication supplier in Norway and has supplied more than 25 of its Cygnus Wireless Alarms to protect the ship up until completion in 2021. […]

07.09.2020